Cookie preferences
This website uses cookies, which are necessary for the technical operation of the website and are always set. Other cookies, which increase the comfort when using this website, are used for direct advertising or to facilitate interaction with other websites and social networks, are only set with your consent.
joke Clean 210
From €46.27 *
Content:
1 piece(s)
* Prices plus VAT plus shipping costs
- Order number: 0666112-1
- GTIN 4065735309909
- eClass 5.1: 30-02-16-90
- eClass 6.0: 30-02-16-90
- eClass 8.0: 30-02-16-90
- eClass 8.1: 30-02-14-04
Cleaning products for ultrasonic cleaners
The ultrasound plays an important role in the... more
Product information "joke Clean 210"
Cleaning products for ultrasonic cleaners
The ultrasound plays an important role in the cleaning process. In addition to the further factors temperature and time, cleaning chemicals are the fourth component. The cleaning media must correspond to the kind of contamination and be compatible with the surface of the cleaning items. Also, not all media are suitable for ultrasonic cleaning.
The cleaned items must be rinsed with water after the ultrasonic cleaning process. To prevent water stains, de-ionised or distilled water (possibly with added corrosion protection) must be used. If such protection cannot be used, corrosion should be prevented by using a rinsing medium that vaporises without leaving residues (e.g. alcohol). Thus, the whole process consists of three stages: cleaning, rinsing, drying.
Cleaning of metals and corrosion
Unalloyed steels are very susceptible to corrosion, particularly after acid ultrasonic cleaning. They require a corrosion protection (at least temporarily) to be added to the cleaning bath and in particular to the aqueous rinsing baths, or a water-displacing rinsing medium (e.g. solvents with added oil). Another successful measure against corrosion is immediate blowing off after the final rinse.
The ultrasound plays an important role in the cleaning process. In addition to the further factors temperature and time, cleaning chemicals are the fourth component. The cleaning media must correspond to the kind of contamination and be compatible with the surface of the cleaning items. Also, not all media are suitable for ultrasonic cleaning.
The cleaned items must be rinsed with water after the ultrasonic cleaning process. To prevent water stains, de-ionised or distilled water (possibly with added corrosion protection) must be used. If such protection cannot be used, corrosion should be prevented by using a rinsing medium that vaporises without leaving residues (e.g. alcohol). Thus, the whole process consists of three stages: cleaning, rinsing, drying.
Cleaning of metals and corrosion
Unalloyed steels are very susceptible to corrosion, particularly after acid ultrasonic cleaning. They require a corrosion protection (at least temporarily) to be added to the cleaning bath and in particular to the aqueous rinsing baths, or a water-displacing rinsing medium (e.g. solvents with added oil). Another successful measure against corrosion is immediate blowing off after the final rinse.
| Content: | 25 l |